Digital Dent Pullers
Spot MULTI
Dent Pulling Machine
Spot MULTI is a professional 15 kVA dent pulling machine set with electronic current and time control. Settings can be adjusted digitally according to the panel thickness to leave minimal marks on the bodywork. It has 7 special programs: 1 - Pulling with triangular washers 2 - Zigzag wire welding 3 - Large washer welding 4 - Small round washer welding 5 - Shrinking with copper tip 6 - Shrinking with carbon electrode 7 - M5 stud welding
Key specifications
- Input Voltage
- 2 Phase, 380 V 50 Hz.
- Open-Circuit Voltage
- 7.7 V
- Required Input Fuse
- 2x63 A (C)
- Maximum Input Power
- 15 kVA
Quote by phone: +90 212 734 39 25
Accessories Supplied with the Machine
- Dent pulling gun
- Triangular washers (5 pcs)
- Zigzag wire welding copper
- Zigzag wire (5 pcs)
- Large washer welding copper
- Large washers (5 pcs)
- Small round washer welding copper
- Earth connection copper
- Carbon electrode (1 pc)
- 4 m 3x4 mm2 mains cable
- 2 m gun power cable
- 2 m earth cable
- 6-prong claw puller
Product Features
- Even if the trigger is held down, the machine delivers output only for the set time. This keeps the pulling gun and cables from overheating, prevents the triangular washer from deforming and avoids large marks on the panel.
- The electronic unit can be operated in two separate modes.
- Normal mode: the user sets current and time digitally according to the material thickness.
- Synergic mode: Spot MULTI is equipped with 7 separate synergic programs, each developed with dedicated software based on material thickness.
- Manual and automatic modes available.
- Manual operation: the machine delivers output once the tip is in contact with the panel and the trigger is pressed.
- Automatic operation: the machine delivers output automatically when the tip touches the panel; the trigger does not need to be pressed.
Technical Data
| Input Voltage | 2 Phase, 380 V 50 Hz. |
|---|---|
| Open-Circuit Voltage | 7.7 V |
| Required Input Fuse | 2x63 A (C) |
| Maximum Input Power | 15 kVA |
| Pulling Capacity | 0.30 to 2.00 mm |
| Insulation Class | H |
| Protection Class | IP 21 |
| Dimensions (w/d/h) (cm) | 52 x 52 x 98 |
| Weight | 47 kg |
Documents
Other products in this group
2026 Product Catalogue