Digital Dent Pullers
Spot MAX
Dent Pulling Machine
Spot MAX is a professional 10 kVA dent pulling machine with electronic current and time control. Settings can be adjusted digitally according to the panel thickness to leave minimal marks on the bodywork.
Key specifications
- Input Voltage
- 1 Phase, 220 V 50 Hz.
- Open-Circuit Voltage
- 7.7 V
- Required Input Fuse
- 1x25 A (C)
- Maximum Input Power
- 10 kVA
Quote by phone: +90 212 734 39 25
Accessories Supplied with the Machine
- Dent pulling gun
- Earth connection copper
- 4 m 3x2.50 mm2 mains cable
- 2 m gun power cable
- 2 m earth cable
Product Features
- Even if the trigger is held down, the machine delivers output only for the set time. This keeps the pulling gun and cables from overheating, prevents the triangular washer from deforming and avoids large marks on the panel.
- Manual and automatic modes available.
- Manual operation: the machine delivers output once the tip is in contact with the panel and the trigger is pressed.
- Automatic operation: the machine delivers output automatically when the tip touches the panel; the trigger does not need to be pressed.
Technical Data
| Input Voltage | 1 Phase, 220 V 50 Hz. |
|---|---|
| Open-Circuit Voltage | 7.7 V |
| Required Input Fuse | 1x25 A (C) |
| Maximum Input Power | 10 kVA |
| Pulling Capacity | 0.30 to 1.30 mm |
| Insulation Class | H |
| Protection Class | IP 21 |
| Dimensions (w/d/h) (cm) | 47 x 50 x 100 |
| Weight | 35 kg |
Documents
Other products in this group
Spot ALU
Aluminium Dent Pulling Set
- Input Voltage
- 1 Phase, 220 V 50 Hz.
- Required Input Fuse
- 1x16 A (C)
2026 Product Catalogue