Spot ALU
Aluminum Dent Pulling System
Included Parts and Accessories
- Stud Spotter Gun
- Earth Clamp
- M6 Studs (100 pcs)
- Rings for M6 studs (10 pcs)
- 4 m 3x2,50 mm2 Supply Cable
- 2 m Power Cable
- 2 m Earthing Cable
Spot ALU is a set of aluminum body puller used to work on the dent of the vehicles with aluminum chasis and panels. It is also suited to work on steel dent pulling of UHSS panels with minimal heat affect.
PRODUCT FEATURES
- Energy storage capacity is 66 milliFarad.
- Stable operation with ergonomic gun
- It can weld 5 to 10 studs per minute. (This number depends on the stud size.)
- Voltage or power can be adjusted digitally according to the bodywork thickness to be pulled and the size of the stud to be welded.
- For extra control, two welding operations are available:
- Automatic operation: the arc begins when the tool is in contact with the metal sheet. It is not necessary to press the button on the handle.
- Manual operation: the arc begins when the tool is in contact with the metal sheet and the trigger is pressed.
TECHNICAL PROPERTIES
| Supply Voltage U1 |
|
1 Phase, 220 V 50 Hz. |
| Supply Fuse |
C Type |
1x16 A |
| Maximum Output Current |
Imax |
20 kA |
| Stud Diameters |
|
M6 |
| Insulation Class |
|
H |
| Protection Class |
|
IP 21 |
| Dimensions (w/l/h) (cm) |
|
47 x 50 x 102 |
| Weight |
|
40 kgs |
TREN
