MIG 180
Inverter MIG / Electrode Welding Machine
- Input Voltage U₁
- 1 Phase, 220 V 50 Hz.
- Required Input Fuse
- 1x25 A (C)
- Welding Current
- 180 A (10 %)
MIG/MAG Welding Machines
MIG-500P LCD
MIG/MAG Welding Machine
The MIG-500P LCD is a three-phase 380 V DC inverter welding machine offering Double Pulse MIG, Pulse MIG, DC MIG, Lift TIG and electrode (MMA) welding, used as a trolley-mounted system with a separate wire feeder and water cooling unit. In MIG mode it welds 0.80 – 1.00 – 1.20 – 1.60 mm steel, stainless steel, aluminium and flux-cored wires; in electrode mode it welds 2.50 – 5.00 mm rutile and basic electrodes. With a 100% duty cycle at 500 A, it is suitable for heavy industrial use.
Key specifications
- Input Voltage
- 3 ~ 380 V 50/60 Hz.
- Required Input Fuse
- 3x50 A (C)
- Cooling
- Fan & Water
- Protection Class
- IP21S
Quote by phone: +90 212 734 39 25
Accessories Supplied with the Machine
- 3 m water-cooled torch
- Earth clamp with cable
- User manual and warranty certificate
Product Features
- Double Pulse MIG, Pulse MIG, DC MIG, Lift TIG and electrode (MMA) welding.
- Separate wire feeder; LCD control panels on both the wire feeder and the power source.
- Synergic control: wire feed speed and welding voltage are set together; voltage can be fine-tuned by -5 / +5 V from the synergic value.
- Actual welding voltage and current are shown on the display while welding.
- Wire check and gas check buttons on the wire feeder.
- Adjustable pulse frequency (1.0 – 2.5 Hz), pulse width (20 – 80) and base current (20 – 99) in Double Pulse mode.
- In Pulse MIG mode the pulse frequency follows the welding current automatically; switches to Cool Pulse automatically when wire speed drops below 2.5 m/min.
- Inductance (-10 / +10), 2T / 4T trigger mode, post-flow time and slow wire start settings.
- Water cooling unit: selection of water-cooled or air-cooled torch, adjustable pump stop delay (30 s – 5 min) and water shortage alarm.
- Memory for 5 welding programs (JOB).
- Metric / inch unit selection for wire speed.
- Gas-shielded or gasless (flux-cored) MIG welding.
- Euro torch connection.
- 36 V AC supply socket for a gas heater when using 100% CO₂.
- Hot start (0 – 10), arc force (0 – 10) and VRD (voltage reduction device) on / off in electrode mode.
- Wheeled trolley with gas cylinder tray and torch holder.
- Suitable for use with three-phase generators of at least 30 kVA.
- Fan and water cooled; overheating, overcurrent and water shortage warnings.
Technical Data
| Input Voltage | 3 ~ 380 V 50/60 Hz. |
|---|---|
| Required Input Fuse | 3x50 A (C) |
| Cooling | Fan & Water |
| Protection Class | IP21S |
| Dimensions (w/d/h) (cm) | 107 x 59 x 146 |
| Weight | 108.6 kg |
Values by Welding Mode
| MIG | Lift TIG | Electrode (MMA) | |
|---|---|---|---|
| Rated Input Power | 24.3 kVA | 25 kVA | 19 kVA |
| Rated Input Current (max.) | 37 A | 38 A | 29 A |
| Rated Input Current (eff.) | 37 A | 38 A | 29 A |
| Current Range | 50 – 500 A | 10 – 500 A | 10 – 500 A |
| Duty Cycle (40 °C) | 500 A (100%) | 500 A (100%) | 500 A (100%) |
| Open Circuit Voltage | 80 V | 1 V – 25 V | 80 V |
| Power Factor | 0.93 | 0.93 | 0.93 |
| Power Source Efficiency | 86.6% | 85% | 87.4% |
| Idle State Power Consumption | < 50 W | < 50 W | < 50 W |
Other products in this group
MIG-200E LED
MIG/MAG Welding Machine
- Input Voltage
- 1 ~ 220 V 50/60 Hz.
- Required Input Fuse
- 1x40 A (C)
- Welding Current
- 200 A (20%)
MIG 200 SYN/P
Synergic / Pulse Inverter MIG Welding Machine
- Input Voltage U₁
- 1 Phase, 220 V 50 Hz.
- Required Input Fuse
- 1x32 A (C)
- Welding Current
- 200 A (10 %)
MIG-220P
MIG/MAG Welding Machine
- Input Voltage
- 1 ~ 220 V 50/60 Hz.
- Required Input Fuse
- 1x40 A (C)
- Welding Current
- 220 A (30%)
2026 Product Catalogue