MIG 180
Inverter MIG / Electrode Welding Machine
- Input Voltage U₁
- 1 Phase, 220 V 50 Hz.
- Required Input Fuse
- 1x25 A (C)
- Welding Current
- 180 A (10 %)
MIG/MAG Welding Machines
MIG-350PN LCD
MIG/MAG Welding Machine
The MIG-350PN LCD is a three-phase 380 V trolley-mounted DC inverter welding machine offering Double Pulse MIG, Pulse MIG, DC MIG, Lift TIG and electrode (MMA) welding in one unit. In MIG mode it welds 0.80 – 1.00 – 1.20 mm steel, stainless steel, aluminium and flux-cored wires; in electrode mode it welds 2.50 – 5.00 mm rutile and basic electrodes.
Key specifications
- Input Voltage
- 3 ~ 380 V 50/60 Hz.
- Required Input Fuse
- 3x32 A (C)
- Cooling
- Fan
- Protection Class
- IP21S
Quote by phone: +90 212 734 39 25
Accessories Supplied with the Machine
- 3 m air-cooled torch
- Electrode holder with cable
- Earth clamp with cable
- User manual and warranty certificate
Product Features
- Double Pulse MIG, Pulse MIG, DC MIG, Lift TIG and electrode (MMA) welding in one machine.
- Synergic control: wire feed speed and welding voltage are set together; voltage can be fine-tuned by -5 / +5 V from the synergic value.
- LCD display panel; actual welding voltage and current are shown while welding.
- Wire check and gas check buttons on the front panel.
- Adjustable pulse frequency (1.0 – 2.5 Hz), pulse width (20 – 80) and base current (20 – 99) in Double Pulse mode.
- In Pulse MIG mode the pulse frequency follows the welding current automatically; switches to Cool Pulse automatically when wire speed drops below 2.5 m/min.
- Inductance (-10 / +10), 2T / 4T trigger mode, post-flow time and slow wire start settings.
- Gas-shielded or gasless (flux-cored) MIG welding via the polarity change cable.
- Euro torch connection and aero socket for a spool gun.
- 36 V AC supply socket on the rear panel for a gas heater when using 100% CO₂.
- Hot start (0 – 10), arc force (0 – 10) and VRD (voltage reduction device) on / off in electrode mode.
- Wheeled trolley with gas cylinder tray and torch holder for easy movement around the workshop.
- Suitable for use with three-phase generators of at least 20 kVA.
- Fan-cooled, with overheating and overcurrent protection.
Technical Data
| Input Voltage | 3 ~ 380 V 50/60 Hz. |
|---|---|
| Required Input Fuse | 3x32 A (C) |
| Cooling | Fan |
| Protection Class | IP21S |
| Dimensions (w/d/h) (cm) | 91 x 58 x 82 |
| Weight | 51.6 kg |
Values by Welding Mode
| MIG | Lift TIG | Electrode (MMA) | |
|---|---|---|---|
| Rated Input Power | 17 kVA | 13.6 kVA | 14.8 kVA |
| Rated Input Current (max.) | 25 A | 20 A | 25 A |
| Rated Input Current (eff.) | 21 A | 15 A | 19 A |
| Current Range | 50 – 350 A | 10 – 350 A | 10 – 300 A |
| Duty Cycle (40 °C) | 350 A (60%) | 350 A (60%) | 300 A (60%) |
| Duty Cycle (40 °C) | 271 A (100%) | 271 A (100%) | 232 A (100%) |
| Open Circuit Voltage | 76 V | 1 V – 25 V | 76 V |
| Power Factor | 0.76 | 0.75 | 0.66 |
| Power Source Efficiency | 85% | 85% | 85.5% |
| Idle State Power Consumption | < 50 W | < 50 W | < 50 W |
Other products in this group
MIG-200E LED
MIG/MAG Welding Machine
- Input Voltage
- 1 ~ 220 V 50/60 Hz.
- Required Input Fuse
- 1x40 A (C)
- Welding Current
- 200 A (20%)
MIG 200 SYN/P
Synergic / Pulse Inverter MIG Welding Machine
- Input Voltage U₁
- 1 Phase, 220 V 50 Hz.
- Required Input Fuse
- 1x32 A (C)
- Welding Current
- 200 A (10 %)
MIG-220P
MIG/MAG Welding Machine
- Input Voltage
- 1 ~ 220 V 50/60 Hz.
- Required Input Fuse
- 1x40 A (C)
- Welding Current
- 220 A (30%)
2026 Product Catalogue